90 Degree Support

$35.00$45.00

This product along with all of our downloads are free for those who hold a yearly subscription, if your looking to purchase multiple downloads then you may be better off upgrading your subscription before doing so.

***This product is a downloadable set of files used to laser or plasma cut the parts ready for assembly, you will be prompted to download these during checkout, this is not a physical product***

The fabrication process can often require a lot of expensive tooling, holding large items at 90 degrees can be difficult without the right setup. To solve this problem we have developed 4 different 90 degree uprights that you can fabricate yourself.

Sizes: 8 Holes x 2 Holes x 6 Holes measuring 225mm long by 75mm wide by 175mm high.

10 Holes x 2 Holes x 6 Holes measuring 275mm long by 75mm wide by 175mm high.

10 Holes x 4 Holes x 6 Holes measuring 275mm long by 125mm wide by 175mm high.

15 Holes x 3 Holes x 6 Holes measuring 400mm long by 100mm wide by 175mm high.

Your purchase will include the DXF files to download which will then need to be sent to your local laser or plasma cutter shop (or you can plasma cut this out yourself) out of 6mm thick mild steel plate, I recommend you use Pickled and Oiled Mild Steel for a scale free finish and ease of weldability.

The 16mm diameter hole pattern sits on a 50mm x 50mm grid and matches the JIG table which go great together

Remember this is a digital download you are purchasing, for assembly make sure you visit our 90 Degree Upright Project video for a complete step by step guide to putting it together.

Want a discount? Become a member by purchasing Motorsport Fabrication Course Subscription – Yearly Subscription!

SKU: N/A Category: Tags: ,

Additional information

Size

8x2x6, 10x2x6, 10x4x6, 15x3x6

Reviews

There are no reviews yet.

Be the first to review “90 Degree Support”

Your email address will not be published. Required fields are marked *