S13
PS13 – Tube Crossmember
After spending the night on the TIG the crossmember is bolted to the engine mounts and ready to slide under the PS13 Ok its not entirely finished yet, i needed to bolt the motor to it, bolt it in the ...
S13 – Tube Crossmember
Tonight i set aside a few hours to start on the tube crossmember on the PS13, heres what happened! You may have seen the Jig i made a while ago, the jig isnt really needed but if you plan on doing a f...
Back on Deck
Well this time last week i was preparing for my last day overseas, my girlfriend and i had an amazing time in Japan, over the next few weeks i will filter through the pictures and share the best with ...
S13 NA Update
Ive been pretty excited about this build lately, the S13 has always been that car that i favour, so much so that the last 2 years its barely moved. Im pretty happy with everything ive already done on ...
S13 Two Tone – Naturally Attractive
Ill give you a little insight into whats been running through my brain lately. Be warned no pics and lots of rambling. Within my shed lies a lot of work to do, ill run you through what ticks over in m...
Parts explosion!
The garage floor is covered at the moment, i pulled the S13s motor down to a bare long motor and have all these parts kicking around, time to make some more storage room, or i have an S15 that could b...
SR City – Playing the game
I spent a couple of hours this afternoon removing the motor from the S13, as you may have read in a previous post this motor is getting pulled down to a bare long motor and then all the parts for the ...
ETS Drift Ute – The components
In this post i am going to explain a little of whats in my head regarding the components that i will be running in the ute. In the corner of my garage lies this S13, I built this car in 2007, in that ...
ETS Garage – Stacking em up
After looking at hoists for the last 4 months i ended up finally biting the bullet and putting an order through, i chose a MaxJax hoist for a lot of reasons, ill do a detailed install post in the comi...